Spletna stran za naprednejše delovanje uporablja piškotke. S klikom na gumb "Potrdi" sprejemate piškotke.
Deli motorja
Izberi podkategorijo
Kupite dele motorja za motocross – izberite pravo prileganje, lastnosti in zmogljivost.
Poišči izdelke za tvoj motor
ali ročno izberi spodaj
White Diamond® Engine Valve
Kibblewhite White Diamond® oversize outer intake valve built for demanding engine rebuilds and high-load valvetrain use. CNC-machined from a one-piece stainless forging and hard-chrome plated for consistent wear resistance.
- Application: Outer Intake (Oversize)
- Size: 28.00 mm head / 5.00 mm stem / 15° tulip angle
- Build: CNC one-piece forging, 360° hard-chrome electroplating, Made in USA
52,19 € z DDV
White Diamond® Engine Valve
Kibblewhite White Diamond® engine valve for valvetrain rebuilds and performance reliability. CNC machined from a one-piece EV8 stainless forging and hard-chrome electroplated for long-lasting wear resistance.
- Center intake, oversize: 28.00 mm (1.102") head
- 5.00 mm (0.1765") stem, 2.990" length, 15° tulip angle
- Requires Kibblewhite spring kit; Made in the USA
52,19 € z DDV
White Diamond® Engine Valve
Kibblewhite White Diamond® exhaust engine valve built for high heat and long service life. CNC-machined from a one-piece forging and hard-chrome plated for consistent wear resistance.
- Application: Exhaust valve
- Size: 28.00 mm head / 5.00 mm stem, 20° tulip angle
- Build: One-piece forging, even 360° hard-chrome plating (Made in USA)
55,73 € z DDV
White Diamond® Engine Valve
Kibblewhite White Diamond® intake engine valve built for reliable sealing and long service life. CNC-machined from a one-piece forging and finished with an even, high-grade hard chrome coat.
- Intake valve, standard size (each)
- Head Ø 32.00 mm (1.260"), length 3.380"
- Stem Ø 4.50 mm (0.1764"), tulip angle 10°
45,65 € z DDV
White Diamond® Engine Valve
Kibblewhite White Diamond® engine exhaust valve built for high heat and long service life. CNC-machined from a one-piece forging and finished with an even hard-chrome coating for consistent wear resistance.
- Application: Exhaust valve
- Sizes: 26.50 mm head, 4.50 mm stem, 3.195" length
- Build: EV8 stainless forging, 360° anode hard-chrome plated (Made in USA)
45,65 € z DDV
White Diamond® Engine Valve
Kibblewhite White Diamond® engine valve for demanding valvetrain rebuilds. CNC-machined from a one-piece forging and finished with an even, high-grade hard chrome coating for consistent wear resistance. Designed for a center intake application.
- Sizes: 27.00 mm (1.063") head, 5.00 mm (0.1765") stem
- Geometry: 3.000" length, 15° tulip angle
- Note: Requires use of a Kibblewhite spring kit
55,73 € z DDV
White Diamond® Engine Valve
Kibblewhite White Diamond® exhaust engine valve for high-demand engine builds and reliable sealing. CNC-machined from a one-piece EV8 stainless steel forging and finished with an even hard-chrome electroplated coating for durability.
- Application: Exhaust valve (oversize)
- Dimensions: 29.00 mm head, 5.00 mm stem, 20° tulip angle
- Note: Requires Kibblewhite spring kit
55,73 € z DDV
Wrist Pin
Wossner WP087 wrist pin (16 mm) is a precision replacement piston pin for Wössner pistons and can also be used with OEM pistons. Built for correct fitment and dependable operation in demanding engine conditions.
- Outside diameter: 16 mm
- Application: Piston (wrist/gudgeon pin)
- Unit: 1 piece (each)
18,36 € z DDV
20,40 € z DDV
Wrist Pin
WOSSNER WP036 wrist pin (16 mm OD) is a replacement piston pin designed for Wössner pistons and can also be used with OEM pistons where fitment matches. Ideal for reliable top-end service and rebuilds.
- Application: Piston wrist pin
- Outside diameter: 16 mm
- Unit: 1 piece (each)
16,50 € z DDV
18,34 € z DDV
Wrist Pin
Wossner WP033 wrist pin is a replacement piston pin designed for Wossner pistons and can also be used with OEM pistons. A dependable choice for top-end rebuilds and restoring correct piston-to-rod fitment.
- Application: Piston
- Outside diameter: 18 mm
- Unit: Sold each
16,50 € z DDV
18,34 € z DDV
Batni sornik
Wossner Batni sornik WP058 je natančno izdelan 14 mm batni sornik, zasnovan za zanesljiv servis zgornjega dela motorja in gladko delovanje povezave bat–ojnica. Je neposredna zamenjava za bate Wossner, lahko pa se uporablja tudi pri OEM batih, kjer se mere ujemajo.
- Zunanji premer: 14 mm
- Uporaba: nadomestni batni sornik (wrist pin / gudgeon pin)
- Kos: 1 kos
18,36 € z DDV
20,40 € z DDV
Sornik bata
Wossner WP032 sornik bata je natančen nadomestni batni sornik za zanesljiv servis zgornjega dela motorja in gladko gibanje med batom in ojnico. Namenjen je batom Wossner in primeren tudi za številne OEM aplikacije batov.
- 15 mm zunanji premer
- Nadomestni sornik bata (piston pin/gudgeon pin)
- Prodaja se kot 1 kos (posamično)
16,50 € z DDV
18,34 € z DDV
Sornik bata (wrist pin)
Wossner WP071 sornik bata (wrist pin / gudgeon pin) je neposredna zamenjava sornika za Wossner bate in se lahko uporablja tudi z mnogimi OEM bati. Idealen za obnovo zgornjega dela motorja (top-end), kjer sta pomembna natančno prileganje in zanesljiva povezava bat–ojnica.
- Uporaba: Bat
- Zunanji premer: 19 mm
- Pakiranje: 1 kos (posamezno)
18,36 € z DDV
20,40 € z DDV
Iglični ležaj sornika bata
Hot Rods WB139 iglični ležaj sornika bata (mali konec ojnice) je OEM nadomestni ležaj, zasnovan za uporabo v ojnici, kjer sta vzdržljivost in zanesljivost pri visokih vrtljajih ključnega pomena. Kletka ležaja je cementirana (case-hardened), profil tipa KZT pa pomaga ohranjati stabilno delovanje pod obremenitvijo.
- Dimenzije: 14 mm ID × 18 mm OD × 16,7 mm dolžina
- Izdelava: cementirana (case-hardened) kletka ležaja
- Uporaba: ležaj sornika bata / mali konec ojnice (kos)
15,90 € z DDV
17,67 € z DDV
Iglični ležaj batnega sornika
HOT RODS WB107 iglični ležaj batnega sornika je OEM-nadomestni ležaj za malo glavo ojnice (small end), izdelan za zanesljivo delovanje pri visokih vrtljajih. Cementirana (case-hardened) kletka izboljša vzdržljivost v zahtevnih pogojih delovanja motorja.
- 14 mm ID / 18 mm OD / 16,2 mm dolžina
- Cementirana kletka ležaja za dolgo življenjsko dobo
- Profili kletke tipa KU/KZ, primerni za visoke vrtljaje
17,24 € z DDV
19,15 € z DDV
Wrist Pin Bearing
HOT RODS WB108 OEM replacement wrist pin bearing for the connecting rod small end, built for reliable high-RPM performance. Case-hardened bearing cage helps improve durability under heavy engine loads.
- Size: 14 mm ID x 18 mm OD x 17.2 mm length
- Case-hardened bearing cage
- KZT cage style (high-RPM suited profile)
17,24 € z DDV
19,15 € z DDV