Spletna stran za naprednejše delovanje uporablja piškotke. S klikom na gumb "Potrdi" sprejemate piškotke.
Deli motorja
Izberi podkategorijo
Kupite dele motorja za motocross – izberite pravo prileganje, lastnosti in zmogljivost.
Poišči izdelke za tvoj motor
ali ročno izberi spodaj
Connecting Rod
PROX Connecting Rod Kit for 450cc 4-stroke engines, built from forged steel for strength and long service life. Supplied as a practical rebuild set for fast, straightforward installation.
- Includes crankpin, big-end bearing, small-end bearing & washers
- Forged steel barreled rod construction
- Key sizes: big end 42.00 mm bore, 142.40 mm length
236,22 € z DDV
Connecting Rod
PROX Connecting Rod Kit for 250cc 4-stroke engines, built from forged steel for dependable strength in demanding use. Supplied as a complete kit for a straightforward crank rebuild.
- Includes crankpin, big-end bearing, small-end bearing & washers
- Forged steel construction
- Rod dimensions: 129.10 mm length, 38.00 mm big-end bore
195,07 € z DDV
Connecting Rod
The PROX Connecting Rod Kit is a forged-steel conrod solution for a dependable engine rebuild. Supplied as a complete kit, it helps simplify installation and restores smooth, reliable operation.
- Complete kit: crankpin, big-end bearing, small-end bearing & washers
- Material: forged steel for strength and durability
- Easy to install
272,54 € z DDV
Connecting Rod
Wössner connecting rod kit manufactured to exacting tolerances from premium forged steel for dependable bottom-end performance. Ideal for engine rebuilds where strength, precision and long service life matter.
- Forged steel construction for high load durability
- Supplied as a kit with required pins/bearings (2T/4T per application)
- Precision manufacturing for correct fit and smooth operation
133,77 € z DDV
Connecting Rod
PROX connecting rod kit for 450cc 4-stroke engines, made from strong forged steel for dependable bottom-end performance. Supplied as a complete kit so you can rebuild with confidence and minimal downtime.
- Complete kit: crankpin, big-end bearing, small-end bearing & washers
- Forged steel construction for strength and durability
- Easy to install during engine rebuild/service
274,37 € z DDV
Connecting Rod
Rebuild your bottom end with a PROX forged-steel connecting rod kit designed for 450cc 4-stroke engines. Supplied as a complete kit for a reliable, straightforward crank service.
- Includes crankpin, big-end bearing, small-end bearing & washers
- Forged steel construction for strength and durability
- Rod length 144.15 mm; center-to-center 103.00 mm
236,22 € z DDV
Connecting Rod
PROX Connecting Rod Kit for 450cc 4-stroke engines, made from forged steel for reliable strength in demanding riding. Delivered as a complete kit to simplify your bottom-end rebuild and get you back on the track faster.
- Includes crankpin, big-end bearing, small-end bearing & washers
- Forged steel construction for durability
- Big-end bore 42.00 mm; length 143.50 mm (C-C 103.50 mm)
236,22 € z DDV
Ojnica
PROX Connecting Rod Kit (03.4334) je ojnica tipa Barreled Rod iz kovanega jekla, zasnovana za zanesljivo obnovo 250cc 4-taktnega motorja. Dobavljena kot komplet za hitro montažo in enakomerno delovanje.
- Vsebina kompleta: čep ročične gredi (crankpin), ležaj velike glave (big-end), ležaj male glave (small-end) in podložke
- Kovano jeklo: visoka trdnost in vzdržljivost pri velikih obremenitvah
- Ključne mere: dolžina 129,50 mm, C-C 92,50 mm, izvrtina velike glave 38,00 mm, izvrtina čepa 16,00 mm
185,77 € z DDV
Ojnica
PROX komplet ojnice za 125 cc 2-taktne motorje, izdelan iz kovanega jekla in dobavljen pripravljen za obnovo. Vključuje ključne obrabne komponente za hitro in zanesljivo montažo.
- Komplet vsebuje: čep ročične gredi (crankpin), iglični ležaj velike glave, iglični ležaj male glave in podložke
- Kovana jeklena ojnica (barreled rod) za trdnost in dolgo življenjsko dobo
- Natančne mere: dolžina 137 mm, premer velike glave 29 mm, premer male glave 19 mm
160,64 € z DDV
Komplet ojnice
Ojačan komplet ojnice Hot Rods, izdelan kot OE-tip nadomestek za zahtevne 450cc 4-taktne motorje. Zasnovan za zanesljivost pri visokih vrtljajih z vrhunskim jeklom, natančnim honanjem in izboljšanimi rešitvami mazanja.
- Certificirana ojnica iz 8620 AISI jekla + površinsko kaljen ojnicni čep (58–62 Rc)
- Iglični ležaj v kletki za dolgo življenjsko dobo pri visokih vrtljajih
- Komplet vključuje ojnico, ojnicni čep, ležaj ojnicnega čepa in potisne podložke
231,74 € z DDV
Connecting Rod Kit
ATHENA Connecting Rod Kit for 250cc engines, designed for OEM-like performance and long-lasting durability. Lightweight construction and surface treatment help reduce stress under hard riding.
- Includes connecting rod, crankpin and needle bearings (pins/shims where required)
- High-frequency surface treatment for higher resistance
- Made in Japan
192,36 € z DDV
Connecting Rod Kit
Rebuild your 450cc 4-stroke bottom end with the PROX Connecting Rod Kit, made from forged steel for durability and consistent performance. Supplied as a complete kit to simplify installation and get your engine back to peak reliability.
- Forged steel connecting rod for strength and long service life
- Includes crankpin, big-end bearing, small-end bearing and washers
- Kit format for easier, faster installation
236,22 € z DDV
Connecting Rod Kit
Hot Rods Connecting Rod Kit is a heavy-duty OE replacement built for reliable high-RPM 4-stroke performance. Made from certified 8620 AISI steel with precision honing and improved oiling for long service life.
- Includes rod, crank pin & crank pin bearing
- Caged needle roller bearing design for longevity at high rpm
- Big end 42.00 mm ID; small end 18.00 mm ID (450cc 4-cycle)
239,51 € z DDV
Connecting Rod Kit
Heavy-duty Hot Rods connecting rod kit engineered as an OE-style replacement for demanding 450cc 4-stroke engines. Built from certified 8620 AISI steel with high-RPM bearing design for long service life.
- Kit includes: connecting rod, crank pin & crank pin bearing
- High-RPM durability: caged needle roller bearing design + shot-peened forging
- Key sizes: C-C 103.0 mm, big end I.D. 42.0 mm, small end I.D. 18.0 mm
239,51 € z DDV
Connecting Rod Kit
ATHENA Connecting Rod Kit for 450cc engines, built with OEM-like materials for reliable performance and long service life. High-frequency surface treatment improves resistance and helps reduce rotational and alternating stress.
- Includes connecting rod, crankpin & needle bearings
- Lightweight, high-quality construction
- Made in Japan
211,62 € z DDV
Connecting Rod Kit
Rebuild your 250/300cc 2-stroke bottom end with a heavy-duty OE replacement connecting rod kit from Hot Rods. Built from certified 8620 AISI steel with high-RPM bearing design for long-lasting reliability.
- Complete kit: rod, crank pin, crank pin bearing, wrist pin bearing & thrust washers
- High-strength materials: 8620 steel rod + case-hardened crankpin (58–62 Rc)
- Optimized lubrication: double-drilled small end for extra cooling and oiling
156,33 € z DDV