Spletna stran za naprednejše delovanje uporablja piškotke. S klikom na gumb "Potrdi" sprejemate piškotke.
Osvežite svoj motor s plastikami, zaščitnimi deli in grafikami po meri.
Poišči izdelke za tvoj motor
ali ročno izberi spodaj
Wave prevleka za sedež
Selle Dalla Valle Wave prevleka za sedež iz ročno šivanega PVC za bolj samozavesten nadzor in lažje prestavljanje telesa na motorju. Postopen oprijem z medium-grip sprednjim delom in ojačanim zadnjim delom “wave” pomaga preprečiti drsenje, hkrati pa ohranja gibanje tekoče.
- Valovito (wave) oblazinjen zadnji del za vrhunski nedrseč učinek
- Enodelna, dvojno šivana trpežna izvedba
- Odporen na vodo in vremenske vplive – črn PVC material
61,40 € z DDV
Wave prevleka sedeža
Selle Dalla Valle Wave prevleka sedeža je zasnovana za dinamično vožnjo in enostavno premikanje na motorju. Postopen oprijem PVC materiala z medium-grip sprednjim delom in oblazinjenim zadnjim “wave” delom pomaga preprečiti drsenje pri pospeševanju.
- Ročno šivana, dvojno šivana enodelna PVC prevleka
- Zadnje oblazinjene wave ojačitve za vrhunsko proti-drsno delovanje
- Odporna na vodo in vremenske vplive (modra) – SDV007WB
61,40 € z DDV
Wave prevleka sedeža
Selle Dalla Valle Wave je ročno šivana PVC prevleka sedeža, zasnovana za bolj dinamično vožnjo z varnim, postopnim oprijemom. Podložene zadnje “wave” ojačitve pomagajo, da ostaneš stabilno na sedežu, hkrati pa omogočajo hitre spremembe položaja.
- Postopen oprijem: srednji oprijem spredaj z izboljšanim nedrsečim zadnjim delom
- Udobje & nadzor: podložene zadnje wave ojačitve
- Vzdržljiva izdelava: dvojno šivanje, PVC odporen na vodo in vremenske vplive
61,40 € z DDV
Wave prevleka sedeža
Selle Dalla Valle Wave prevleka sedeža je ročno šivana PVC prevleka, zasnovana za dinamičen slog vožnje, ki združuje nadzorovan oprijem in svobodo gibanja. Zadnje ojačitve z valovitim oblazinjenjem izboljšajo nedrsečo stabilnost, hkrati pa omogočajo gladko menjavo položaja.
- Postopen oprijem: srednji oprijem spredaj za več mobilnosti
- Wave zadnje oblazinjenje: ojačana nedrseča opora
- Vzdržljiva izdelava: vodoodporno/vremensko odporno, dvojni šivi
57,35 € z DDV
Xtrem zaščita podvozja (skid plate)
AXP Racing Xtrem Skid Plate je narejen za ekstremno off-road uporabo in nudi maksimalno zaščito spodnjega dela motocikla brez ropotanja in udrtin, značilnih za aluminijaste plošče. Enodelna 8 mm HDPE konstrukcija je lahka, vzdržljiva in odporna na vibracije.
- 8 mm HDPE “oneblock” zasnova za visoko odpornost na udarce
- Popolna pokritost: okvir, vzvodi (linkage) in ohišja motorja (pri 4T modelih tudi vodna črpalka)
- Brez vibracij / brez deformacij za tišjo in še bolj robustno zaščito
100,65 € z DDV
Xtrem drsna plošča
AXP Racing Xtrem drsna plošča je narejena za ekstremno vožnjo po terenu in zagotavlja maksimalno zaščito spodnjega dela motorja brez hrupa in udrtin, značilnih za aluminijaste plošče. Enodelna 8 mm HDPE konstrukcija ostane lahka, vzdržljiva in brez vibracij.
- 8 mm HDPE polietilen – lahka, brez deformacij
- Popolna pokritost – zaščita okvirja, nihajnega mehanizma (linkage) in karterjev motorja
- Dodatna zaščita – zaščita vodne črpalke pri 4-taktnih modelih
100,65 € z DDV
Xtrem Skid Plate
AXP Racing Xtrem skid plate for extreme off-road use, built to deliver maximum protection with full coverage of critical components. Made from durable 8 mm HDPE to stay light, quiet and impact-resistant.
- 8 mm HDPE “one-block” construction for high resistance
- Full coverage: frame, engine cases & linkage guard
- No vibrations, no deformation—ideal vs. alloy/carbon
161,65 € z DDV
Xtrem Skid Plate
The AXP Racing Xtrem skid plate is built for extreme off-road use, delivering maximum protection with a lightweight 8 mm HDPE one-piece construction. It helps prevent impacts to the frame, linkage and engine cases while reducing vibration compared to alloy or carbon.
- 8 mm HDPE durable, no deformation, low vibration
- Full coverage frame, linkage & engine cases (water pump protection on 4T models)
- Mounting hardware included for straightforward installation
161,65 € z DDV
Xtrem Skid Plate
AXP Racing Xtrem Skid Plate is built for extreme off-road use, delivering maximum underbody protection with full coverage. The 8 mm HDPE one-piece design is lightweight, durable and resistant to vibration and deformation.
- 8 mm HDPE polyethylene “oneblock” construction
- Full coverage for frame, linkage and engine cases
- Extra protection including water pump protection on 4-stroke models
161,65 € z DDV
Xtrem Skid Plate
AXP Racing Xtrem skid plate delivers maximum full-coverage protection for extreme off-road riding. Built from 8 mm HDPE for high impact resistance without vibration or deformation.
- 8 mm HDPE one-piece “oneblock” construction (inside welded)
- Full coverage: frame, linkage and engine cases protection
- Lightweight & durable alternative to alloy or carbon
161,65 € z DDV
Xtrem Skid Plate
AXP Racing Xtrem Skid Plate is built for extreme off-road use, offering maximum full-coverage protection for your bike’s underside. Made from 8 mm HDPE, it’s lightweight, durable and designed to avoid vibrations and deformation.
- 8 mm HDPE “one-block” construction for high impact resistance
- Full coverage for frame, linkage and engine cases
- Quiet & stable: no vibrations, no warping under hard use
161,65 € z DDV
Xtrem Skid Plate
The AXP Racing Xtrem skid plate is built for extreme use, delivering maximum underbody protection for motocross and enduro bikes. Its 8 mm HDPE one-block design helps prevent impacts without vibration or deformation.
- 8 mm HDPE polyethylene: lightweight, durable and quiet
- Full coverage: frame, linkage and engine cases protected
- Linkage guard included; water pump protection on 4-stroke models
161,65 € z DDV
Xtreme Skid Plate
The Moose Offroad Xtreme Skid Plate delivers full-coverage under-engine protection with integrated linkage guarding. Built from 8mm high-density polyethylene, it’s lighter than aluminum and won’t rattle on rough terrain.
- 8 mm thick HDPE for increased impact protection
- Full linkage protection (with linkage guard)
- ~40% lighter than aluminum + mounting hardware included
191,70 € z DDV
Xtreme Skid Plate
Moose Offroad Xtreme Skid Plate delivers tough, full-coverage under-engine protection in 8 mm HDPE. It’s significantly lighter than aluminum and designed to stay quiet with no rattling. Includes linkage protection plus mounting hardware for an easy install.
- 8 mm HDPE for increased impact and abrasion resistance
- With linkage guard for full lower chassis protection
- 40% lighter than aluminum and quieter in rough terrain
160,98 € z DDV
Zebra Seat Cover
The Blackbird Racing Zebra seat cover is a one-piece cover built to refresh your bike with a modern, aggressive look and dependable grip. Designed for excellent durability and water-resistant performance, it helps you stay planted when riding hard.
- Excellent non-slip performance for better control
- Water-resistant material for wet/muddy conditions
- Durable, aggressive Zebra design (black/blue)
87,45 € z DDV
Zebra Seat Cover
Blackbird Racing Zebra one-piece seat cover designed to boost grip and control while riding. Built for excellent durability with a water-resistant finish and an aggressive, modern look.
- ✅ Excellent non-slip performance for better bike control
- ✅ Durable, wear-resistant construction
- ✅ Water-resistant black/blue Zebra design
87,45 € z DDV