Spletna stran za naprednejše delovanje uporablja piškotke. S klikom na gumb "Potrdi" sprejemate piškotke.
Ročične gredi in ojnice
Kupite ročične gredi in ojnice za motokros – izberite pravo prileganje, lastnosti in zmogljivost.
Poišči izdelke za tvoj motor
ali ročno izberi spodaj
Ojnica
PROX komplet ojnice za 125 ccm 2-taktne motorje, izdelan iz kovanega jekla za zanesljivo trdnost pri obnovi motorja. Dobavljen kot popoln komplet za lažjo montažo in ponovno zanesljivost spodnjega dela motorja.
- Vključuje čep ročične gredi, ležaj ojnice (big-end), ležaj male ojnice (small-end) in podložke
- Kovana jeklena ojnica, izvedba “barreled rod”
- Dolžina 134,25 mm; medosna razdalja 102,00 mm; premer velikega ušesa 29,00 mm
160,64 € z DDV
Ojnica
Hot Rods Connecting Rod Kit 8718 je komplet za obnovo ojnice za 125cc 2-taktne motorje, zasnovan za trdnost in zanesljivost pri visokih vrtljajih. Kakovostni materiali in natančne mere pomagajo povrniti mirno delovanje ter zmanjšati obrabo spodnjega dela motorja.
- Ojnica iz jekla 8620 AISI za vrhunsko trdnost
- Kompletni set: ojnica, čep ročične gredi, ležaji in potisne podložke
- Zasnova za visoke vrtljaje z dolgo življenjsko dobo kletkastega igličnega ležaja
144,00 € z DDV
Ojnica
PROX komplet ojnice za 65 cc 2-taktne motorje, izdelan iz kovanega jekla za vzdržljivo in zanesljivo delovanje spodnjega dela motorja. Dobavljen kot kompleten, enostaven komplet za montažo pri obnovi.
- Vključuje: čep ojnice, ležaj velike glave, ležaj male glave in podložke
- Barreled zasnova ojnice; konstrukcija iz kovanega jekla
- Premer velike glave 24,00 mm; dolžina 116,70 mm; C-C 88,00 mm
133,24 € z DDV
Ojnica
PROX komplet ojnice za 2-taktne motorje 60/65cc, izdelan iz kovanega jekla za visoko trdnost in dolgo življenjsko dobo. Dobavljen kot kompleten komplet za enostavno obnovo in zanesljivo delovanje spodnjega dela motorja.
- Vključuje čep ročične gredi, ležaj velike glave, ležaj male glave in podložke
- Konstrukcija iz kovanega jekla
- Ključne mere: dolžina 114 mm, C-C 85 mm, izvrtina velike glave 27 mm
120,40 € z DDV
Connecting Rod
PROX connecting rod kit for 250cc 2-stroke engines, supplied as a complete crank rebuild set for fast, reliable installation. Forged steel construction helps restore smooth operation and durability.
- Complete kit: crankpin, big-end bearing, small-end bearing & washers
- Forged steel barreled rod for strength and longevity
- Precision dimensions for correct fit during rebuilds
178,57 € z DDV
Connecting Rod
Rebuild your 2-stroke bottom end with a PROX forged-steel connecting rod kit designed for durability and precise fit. Supplied as a complete kit to simplify installation and restore smooth, reliable engine operation.
- Complete kit: crankpin, big-end bearing, small-end bearing & washers
- Forged steel construction for strength and longevity
- Key sizes: big end bore 29.00 mm, length 124.30 mm, C-C 92.00 mm
129,75 € z DDV
Connecting Rod
PROX connecting rod kit for 125cc 2-stroke engines, built from forged steel for reliable strength in demanding riding. Supplied complete with the key wear parts for a fast, straightforward rebuild.
- Includes crankpin, big-end bearing, small-end bearing & washers
- Barreled rod design; easy to install
- Big end bore 29.00 mm; center-to-center 104.00 mm; length 137.00 mm
160,64 € z DDV
Connecting Rod
Rebuild your 80cc 2-stroke bottom end with the PROX Connecting Rod Kit, made from forged steel for strength and long service life. Supplied as a complete kit for a straightforward installation and dependable performance.
- Complete kit: crankpin, big-end bearing, small-end bearing & washers
- Material: forged steel
- Key sizes: length 126.5 mm, C-C 92.0 mm, big end bore 29.0 mm
129,75 € z DDV
Connecting Rod
Wössner Connecting Rod Kit manufactured from premium forged steel for strength and long engine life. Built to exacting tolerances for reliable fit and smooth operation during rebuilds.
- Forged steel construction
- Supplied as a complete kit (pins/bearings included by application)
- Precision manufacturing for dependable performance
104,97 € z DDV
Connecting Rod
Rebuild your 2-stroke bottom end with the PROX Connecting Rod Kit, made from forged steel for strength and durability. Supplied as a complete kit for fast, straightforward installation.
- Includes crankpin, big-end bearing, small-end bearing & washers
- Forged steel construction for long service life
- Key sizes: big end bore 29.00 mm, center-to-center 109.00 mm
160,64 € z DDV
Connecting Rod
PROX forged-steel connecting rod kit for 125cc 2-stroke engines—built for dependable rebuilds and smooth operation. Supplied as a complete set for fast, straightforward installation.
- Complete kit: crankpin, big-end bearing, small-end bearing & washers
- Forged steel construction for strength and durability
- Barreled rod dimensions: length 137 mm, C-C 104 mm
160,64 € z DDV
Connecting Rod
Wössner Connecting Rod Kit P2010 for 2-stroke engines, built from shot-peened 8620 forged steel for maximum strength and long service life. Ideal for a reliable bottom-end refresh with matched components.
- Material: 8620 forged alloy steel
- Includes: rod, big-end pin, bearings & washers/spacers
- Design: FEA-optimized, German engineered
131,81 € z DDV
Connecting Rod
PROX Connecting Rod Kit for 250cc 4-stroke engines, built from forged steel for dependable strength in demanding use. Supplied as a complete kit for a straightforward crank rebuild.
- Includes crankpin, big-end bearing, small-end bearing & washers
- Forged steel construction
- Rod dimensions: 129.10 mm length, 38.00 mm big-end bore
195,07 € z DDV
Connecting Rod
Wössner connecting rod kit manufactured to exacting tolerances from premium forged steel for dependable bottom-end performance. Ideal for engine rebuilds where strength, precision and long service life matter.
- Forged steel construction for high load durability
- Supplied as a kit with required pins/bearings (2T/4T per application)
- Precision manufacturing for correct fit and smooth operation
133,77 € z DDV
Connecting Rod
The PROX Connecting Rod Kit is a forged-steel conrod solution for a dependable engine rebuild. Supplied as a complete kit, it helps simplify installation and restores smooth, reliable operation.
- Complete kit: crankpin, big-end bearing, small-end bearing & washers
- Material: forged steel for strength and durability
- Easy to install
272,54 € z DDV
Connecting Rod
PROX Connecting Rod Kit for 450cc 4-stroke engines, built from forged steel for strength and long service life. Supplied as a practical rebuild set for fast, straightforward installation.
- Includes crankpin, big-end bearing, small-end bearing & washers
- Forged steel barreled rod construction
- Key sizes: big end 42.00 mm bore, 142.40 mm length
236,22 € z DDV