Spletna stran za naprednejše delovanje uporablja piškotke. S klikom na gumb "Potrdi" sprejemate piškotke.
Verige odmičnih gredi in odmične gredi
Kupite verige in zobnike za vzdržljivo prestavno razmerje in gladko podajanje moči.
Poišči izdelke za tvoj motor
ali ročno izberi spodaj
Veriga odmične gredi
Veriga odmične gredi Wiseco WCC007 je izdelana iz vrhunskih materialov za manj trenja in daljšo življenjsko dobo. Trpežna zasnova verige v “M” izvedbi zagotavlja maksimalno trdnost za zanesljivo krmiljenje ventilov.
- Velikost verige: 92RH2010
- Število členov: 114
- Zasnovano, da preseže: OEM specifikacije in tolerance
63,45 € z DDV
70,50 € z DDV
Cam Chain
PROX Cam Chain built to OEM specifications for dependable valve timing and long service life. Manufactured in Japan by BorgWarner with an M-type chain design for maximum durability.
- OEM-spec fit for straightforward replacement
- M-type chain with advanced pin/link connection
- Heat-treated pins for performance and wear resistance
80,47 € z DDV
89,41 € z DDV
Cam Chain
PROX cam chain manufactured in Japan by BorgWarner and designed to OEM specifications for reliable valve timing. A strong M-type chain with heat-treated pins helps deliver long service life and consistent performance.
- 124 links (Vendor P/N: 31.4406)
- OEM-spec fit for correct timing and compatibility
- Heat-treated M-type chain for durability and wear resistance
77,18 € z DDV
85,75 € z DDV
Cam Chain
Wiseco cam chain (WCC022) is a premium timing chain designed to meet or exceed OEM tolerances for reliable valve timing and long service life. Its durable “M” style chain construction helps reduce friction while maximizing strength for demanding 4-stroke engine use.
- 122 links (Chain size: 98XRH2010)
- Premium materials to reduce friction and wear
- Exceeds OEM specs thanks to Wiseco in-house engineering
83,00 € z DDV
92,22 € z DDV
Cam Chain
PROX cam chain built to OEM specifications for accurate valve timing and reliable engine performance. Manufactured in Japan by BorgWarner with a durable M-type design for long service life.
- 114 links steel cam/timing chain
- Heat-treated pin and advanced pin-link connection
- OEM-spec fit for dependable performance
59,00 € z DDV
65,55 € z DDV
Cam Chain
PROX cam chain manufactured in Japan by BorgWarner and built to OEM specifications for precise, reliable valve timing. A strong M-type design with heat-treated pins helps maximize durability under high engine loads.
- 118 links
- M-type chain with heat-treated pins
- OEM-spec fit and performance
72,30 € z DDV
80,34 € z DDV
Cam Chain
HOT CAMS cam (timing) chain engineered to exceed OEM tolerances for accurate valve timing and long service life. Heat-treated steel links deliver excellent friction and impact resistance for demanding engine conditions.
- Silent chain design for smooth, quieter operation
- 118 links (Chain Size: 98XRH2010)
- Heat-treated steel links; raw finish
62,84 € z DDV
69,82 € z DDV
Cam Chain
Vertex cam chain built with genuine Morse chain for maximum durability and stretch resistance—ideal for reliable valve timing on many 4-stroke engines.
- ✅ Morse cam chain construction (Vertex spec)
- ✅ 118 links
- ✅ Fits a variety of 4-stroke models
75,49 € z DDV
83,88 € z DDV
Camshaft Exhaust Stage 1
HOT CAMS Stage 1 exhaust camshaft is designed to boost low-end torque and improve throttle response on dual-cam engines. Built as a drop-in upgrade with an exact CNC-machined lobe profile for proven, reliable performance.
- Stage 1 profile for stronger low–mid RPM torque (up to ~8000 rpm)
- CNC-machined 8620 billet, case-hardened steel for precise fit
- Uses stock valve springs (unless otherwise noted); FI remap not required
270,05 € z DDV
300,06 € z DDV
Camshaft Exhaust Stage 1
HOT CAMS Stage 1 exhaust camshaft is a drop-in performance upgrade designed to boost low-end torque and improve throttle response. CNC-machined from 8620 billet, case-hardened steel for precise fitment and proven power gains.
- Stage 1 profile: +5–10% power gain, stronger low–mid range
- I.T.R. technology + auto-decompression mechanism
- Exhaust valve lash: 0.220 mm (dual-cam engine)
171,12 € z DDV
190,14 € z DDV
Odmična gred izpuha Stage 1
Izpušna odmična gred HOT CAMS Stage 1 je drop-in nadgradnja ventilskega sklopa, zasnovana za boljši navor pri nizkih vrtljajih in več moči skozi celoten razpon. CNC-obdelana iz 8620 billet, cementiranega (case-hardened) jekla za natančno prileganje in preverjeno zmogljivost.
- Zasnovana za več navora pri nizkih vrtljajih z ~5–10% pridobitvijo moči
- Drop-in izvedba: uporablja serijske vzmeti ventilov (če ni navedeno drugače)
- Trajanje izpuha 244° / dvig 7,980 mm (motorji z dvojno odmično gredjo)
272,46 € z DDV
302,73 € z DDV
Odmična gred izpušna Stage 1 & 2
Hot Cams Stage 1/2 izpušna odmična gred za motorje z dvojno odmično gredjo (DOHC), zasnovana kot »drop-in« nadgradnja za več moči od srednjih do visokih vrtljajev in ostrejši odziv. Preverjeno na dyno testu in CNC obdelano za natančno prileganje ter točen profil odmikov.
- Potencialno 5%–10% povečanje moči
- CNC obdelan 8620 billet, površinsko utrjeno jeklo
- Uporablja serijske ventilne vzmeti (razen če je navedeno drugače)
665,19 € z DDV
739,10 € z DDV
Izpušna odmična gred Stage 2
HOT CAMS Stage 2 izpušna odmična gred je »drop-in« performance nadgradnja za več moči v srednjih in visokih vrtljajih ter boljši over-rev. CNC obdelana iz 8620 billet, površinsko kaljeno jeklo za natančno prileganje in vzdržljive profile odmičnih grb.
- Povečanje moči: približno 5–10% (srednji do vrh vrtljajev)
- Drop-in izvedba: uporablja serijske ventilne vzmeti (razen če je navedeno drugače)
- Specifikacije: 248° trajanje, 8,250 mm dvig, 98° središčnica odmične grbe
272,46 € z DDV
302,73 € z DDV
Camshaft Exhaust Stage 2
HOT CAMS Stage 2 exhaust camshaft for dual-cam engines, built for stronger mid-to-top power and sharper throttle response. CNC-machined from case-hardened 8620 billet steel for precise fit and consistent lobe profile.
- Mid-to-top end focused: +5–10% power gain
- Drop-in design: uses stock valve springs (unless noted)
- Specs: 259° duration, 10.160 mm lift, 103.5° lobe centerline
297,40 € z DDV
330,45 € z DDV
Camshaft Intake Stage 1
HOT CAMS Stage 1 intake camshaft is a proven, drop-in valvetrain upgrade built to increase low-end torque and improve throttle response. CNC-machined from case-hardened 8620 billet steel for precise fitment and reliable performance.
- Adds approx. 5–10% power gain (dyno proven)
- Drop-in design: uses stock valve springs (unless noted)
- Intake specs: 234° duration, 9.14 mm lift, 104° lobe centerline
293,26 € z DDV
325,85 € z DDV
Camshaft Intake Stage 1
Upgrade your valvetrain with the HOT CAMS Stage 1 Intake Camshaft for stronger, more responsive performance. CNC-machined from 8620 billet and case-hardened for precise fit and proven durability.
- Dyno-proven 5–10% power gain
- Drop-in cam designed to work with stock valve springs (unless noted)
- Intake specs: 269° duration, 8.860 mm lift, 110° lobe centerline
297,40 € z DDV
330,45 € z DDV